系统主要信息主机名称 host.xxxx.com
主机对外IP 192.168.0.250
内核版本 FreeBSD 5.2.1-RELEASE-p9 #0 Tue Jul 27 02:05
Distro Name FreeBSD
开机时间 6 分钟
在线使用者 1
平均负载 0.00 0.07 0.05
硬件信息处理器数量 4
CPU型号 Intel(R) Xeon(TM) CPU 2.40GHz
芯片速度 2405 MHz
PCI设备 agp0: Intel 82875P host to AGP bridge
atapci0: Promise PDC20378 SATA150 controller
atapci1: Intel ICH5 UDMA100 controller
fxp0: Intel 82550 Pro/100 Ethernet
isab0: PCI-ISA bridge
pcib1: PCI-PCI bridge
pcib2: ACPI PCI-PCI bridge
IDE设备 ad0: HDS722580VLAT20 (容量: 80.45 GB)
ad1: HDS722580VLAT20 (容量: 80.45 GB)
dmesg
- Copyright (c) 1992-2004 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD 5.2.1-RELEASE-p9 #0: Tue Jul 27 02:05:54 CST 2004
- lt2-446@host.guose.com:/usr/obj/usr/src/sys/MYKERNEL
- Preloaded elf kernel "/boot/kernel/kernel" at 0xc075e000.
- Preloaded elf module "/boot/kernel/acpi.ko" at 0xc075e21c.
- ACPI APIC Table: <IntelR AWRDACPI>
- Timecounter "i8254" frequency 1193182 Hz quality 0
- CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2405.47-MHz 686-class CPU)
- Origin = "GenuineIntel" Id = 0xf25 Stepping = 5
- Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Hyperthreading: 2 logical CPUs
- real memory = 2146304000 (2046 MB)
- avail memory = 2084446208 (1987 MB)
- FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
- cpu0 (BSP): APIC ID: 0
- cpu1 (AP): APIC ID: 1
- cpu2 (AP): APIC ID: 6
- cpu3 (AP): APIC ID: 7
- ioapic0: Changing APIC ID to 4
- ioapic0 <Version 2.0> irqs 0-23 on motherboard
- Pentium Pro MTRR support enabled
- npx0: [FAST]
- npx0: <math processor> on motherboard
- npx0: INT 16 interface
- acpi0: <IntelR AWRDACPI> on motherboard
- pcibios: BIOS version 2.10
- Using $PIR table, 11 entries at 0xc00fde60
- acpi0: Power Button (fixed)
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
- acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
- acpi_cpu0: <CPU> on acpi0
- acpi_cpu1: <CPU> on acpi0
- acpi_cpu2: <CPU> on acpi0
- acpi_cpu3: <CPU> on acpi0
- acpi_tz0: <Thermal Zone> on acpi0
- acpi_button0: <Power Button> on acpi0
- acpi_button1: <Sleep Button> on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- agp0: <Intel 82875P host to AGP bridge> mem 0xf0000000-0xf7ffffff at device 0.0 on pci0
- pcib1: <PCI-PCI bridge> at device 1.0 on pci0
- pci1: <PCI bus> on pcib1
- pcib1: slot 0 INTA is routed to irq 16
- pci1: <display, VGA> at device 0.0 (no driver attached)
- pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
- pci2: <ACPI PCI bus> on pcib2
- atapci0: <Promise PDC20378 SATA150 controller> port 0xb800-0xb87f,0xb400-0xb40f,0xb000-0xb03f mem 0xfb020000-0xfb03ffff,0xfb040000-0xfb040fff irq 23 at device 4.0 on pci2
- atapci0: [MPSAFE]
- ata2: at 0xfb040000 on atapci0
- ata2: [MPSAFE]
- ata3: at 0xfb040000 on atapci0
- ata3: [MPSAFE]
- ata4: at 0xfb040000 on atapci0
- ata4: [MPSAFE]
- fxp0: <Intel 82550 Pro/100 Ethernet> port 0xbc00-0xbc3f mem 0xfb000000-0xfb01ffff,0xfb041000-0xfb041fff irq 21 at device 9.0 on pci2
- fxp0: Ethernet address 00:02:b3:ea:7e:4d
- miibus0: <MII bus> on fxp0
- inphy0: <i82555 10/100 media interface> on miibus0
- inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
- isab0: <PCI-ISA bridge> at device 31.0 on pci0
- isa0: <ISA bus> on isab0
- atapci1: <Intel ICH5 UDMA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
- ata0: at 0x1f0 irq 14 on atapci1
- ata0: [MPSAFE]
- ata1: at 0x170 irq 15 on atapci1
- ata1: [MPSAFE]
- pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
- orm0: <Option ROMs> at iomem 0xd0000-0xd17ff,0xc0000-0xcffff on isa0
- atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
- ppc0: parallel port not found.
- sc0: <System console> at flags 0x100 on isa0
- sc0: VGA <16 virtual consoles, flags=0x300>
- vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
- Timecounters tick every 10.000 msec
- GEOM: create disk ad0 dp=0xc4c74060
- ad0: 78533MB <HDS722580VLAT20> [159560/16/63] at ata0-master UDMA100
- GEOM: create disk ad1 dp=0xc4c3de60
- ad1: 78533MB <HDS722580VLAT20> [159560/16/63] at ata0-slave UDMA100
- SMP: AP CPU #1 Launched!
- SMP: AP CPU #2 Launched!
- SMP: AP CPU #3 Launched!
- Mounting root from ufs:/dev/ad0s1a
内核文件
- #
- # GENERIC -- Generic kernel configuration file for FreeBSD/i386
- #
- # For more information on this file, please read the handbook section on
- # Kernel Configuration Files:
- #
- # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-conf
- ig.html
- #
- # The handbook is also available locally in /usr/share/doc/handbook
- # if you've installed the doc distribution, otherwise always see the
- # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
- # latest information.
- #
- # An exhaustive list of options and more detailed explanations of the
- # device lines is also present in the ../../conf/NOTES and NOTES files.
- # If you are in doubt as to the purpose or necessity of a line, check first
- #
- # GENERIC -- Generic kernel configuration file for FreeBSD/i386
- #
- # For more information on this file, please read the handbook section on
- # in NOTES.
- #
- # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.394.2.3 2004/01/26 19:42:11 nectar Exp
- $
- machine i386
- cpu I686_CPU
- ident MYKERNEL
- maxusers 64
- #To statically compile in device wiring instead of /boot/device.hints
- #hints "GENERIC.hints" #Default places to look for devices.
- #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
- options SCHED_4BSD #4BSD scheduler
- options INET #InterNETworking
- options FFS #Berkeley Fast Filesystem
- options SOFTUPDATES #Enable FFS soft updates support
- options UFS_ACL #Support for access control lists
- options UFS_DIRHASH #Improve performance on big directories
- options MD_ROOT #MD is a potential root device
- options NFSCLIENT #Network Filesystem Client
- options MSDOSFS #MSDOS Filesystem
- options PROCFS #Process filesystem (requires PSEUDOFS)
- options PSEUDOFS #Pseudo-filesystem framework
- options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
- options COMPAT_FREEBSD4 #Compatible with FreeBSD4
- options KTRACE #ktrace(1) support
- options SYSVSHM #SYSV-style shared memory
- options SYSVMSG #SYSV-style message queues
- options SYSVSEM #SYSV-style semaphores
- options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
- options KBD_INSTALL_CDEV # install a CDEV entry in /dev
- options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
- # output. Adds ~128k to driver.
- options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
- # output. Adds ~215k to driver.
- options PFIL_HOOKS # pfil(9) framework
- # Debugging for use in -current
- #options DDB #Enable the kernel debugger
- #options INVARIANTS #Enable calls of extra sanity checking
- options INVARIANT_SUPPORT #Extra sanity checks of internal structu
- res, required by INVARIANTS
- #options WITNESS #Enable checks to detect deadlocks and c
- ycles
- #options WITNESS_SKIPSPIN #Don't run witness on spinlocks for spee
- d
- # To make an SMP kernel, the next two are needed
- options SMP # Symmetric MultiProcessor Kernel
- device apic # I/O APIC
- device isa
- device eisa
- device pci
- # ATA and ATAPI devices
- device ata
- device atadisk # ATA disk drives
- device atapicd # ATAPI CDROM drives
- options ATA_STATIC_ID #Static device numbering
- # atkbdc0 controls both the keyboard and the PS/2 mouse
- device atkbdc # AT keyboard controller
- device atkbd # AT keyboard
- device psm # PS/2 mouse
- device vga # VGA video card driver
- device splash # Splash screen and screen saver support
- #options INVARIANTS #Enable calls of extra sanity checking
- options INVARIANT_SUPPORT #Extra sanity checks of internal structu
- res, required by INVARIANTS
- #options WITNESS #Enable checks to detect deadlocks and c
- ycles
- #options WITNESS_SKIPSPIN #Don't run witness on spinlocks for spee
- d
- # To make an SMP kernel, the next two are needed
- options SMP # Symmetric MultiProcessor Kernel
- device apic # I/O APIC
- device isa
- device eisa
- device pci
- # ATA and ATAPI devices
- device ata
- device atadisk # ATA disk drives
- device atapicd # ATAPI CDROM drives
- options ATA_STATIC_ID #Static device numbering
- # atkbdc0 controls both the keyboard and the PS/2 mouse
- device atkbdc # AT keyboard controller
- device atkbd # AT keyboard
- device psm # PS/2 mouse
- device vga # VGA video card driver
- device splash # Splash screen and screen saver support
- # syscons is the default console driver, resembling an SCO console
- device sc
- device agp # support several AGP chipsets
- # Floating point support - do not disable.
- device npx
- #device pcic # ExCA ISA and PCI bridges
- device pccard # PC Card (16-bit) bus
- device cardbus # CardBus (32-bit) bus
- # Parallel port
- device ppc
- device ppbus # Parallel port bus (required)
- device plip # TCP/IP over parallel
- device ppi # Parallel port interface device
- #device vpo # Requires scbus and da
- # If you've got a "dumb" serial or parallel PCI card that is
- # supported by the puc(4) glue driver, uncomment the following
- # line to enable it (connects to the sio and/or ppc drivers):
- #device puc
- # PCI Ethernet NICs.
- device de # DEC/Intel DC21x4x (``Tulip'')
- device em # Intel PRO/1000 adapter Gigabit Ethernet Card
- # PCI Ethernet NICs that use the common MII bus controller code.
- # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
- device miibus # MII bus support
- device dc # DEC/Intel 21143 and various workalikes
- device fxp # Intel EtherExpress PRO/100B (82557, 82558)
- # Pseudo devices - the number indicates how many units to allocate.
- device random # Entropy device
- device loop # Network loopback
- device ether # Ethernet support
- device sl # Kernel SLIP
- device pty # Pseudo-ttys (telnet etc)
- device md # Memory "disks"
- # The `bpf' device enables the Berkeley Packet Filter.
- # Be aware of the administrative consequences of enabling this!
- device bpf # Berkeley packet filter
- # FireWire support
- device firewire # FireWire bus code
- device fwe # Ethernet over FireWire (non-standard!)
用来做WEB服务器,提供PHP MYSQL CGI QMAIL CPANEL 服务还需要优化那些地方呢?请指教...
多次的测试结果:
- 整数运算能力测试(1+1运算300万次)
- Tahiti 的电脑(P4 1.7G 256M WinXP) 1.421秒
- PIPNI免费空间(2004/06/28 02:08) 2.545秒
- 神话科技风CGI型(2004/06/28 02:03) 0.797秒
- 您正在使用的这台服务器 1.189秒
- 浮点运算能力测试(开平方300万次)
- Tahiti 的电脑(P4 1.7G 256M WinXP) 1.358秒
- PIPNI免费空间(2004/06/28 02:08) 2.648秒
- 神话科技风CGI型(2004/06/28 02:03) 0.729秒
- 您正在使用的这台服务器 1.191秒
- 数据I/O能力测试(读取10K文件10000次)
- Tahiti 的电脑(P4 1.7G 256M WinXP) 0.177秒
- PIPNI免费空间(2004/06/28 02:08) 0.171秒
- 神话科技风CGI型(2004/06/28 02:03) 0.156秒
- 您正在使用的这台服务器 0.23秒
|
置顶卡
喧嚣卡
变色卡
千斤顶
显身卡