试了所有的apache版本，但总是与系统有冲，造成蓝屏- [PHP]
- ;;;;;;;;;;;
- ; WARNING ;
- ;;;;;;;;;;;
- ; This is the default settings file for new PHP installations.
- ; By default, PHP installs itself with a configuration suitable for
- ; development purposes, and *NOT* for production purposes.
- ; For several security-oriented considerations that should be taken
- ; before going online with your site, please consult php.ini-recommended
- ; and http://php.net/manual/en/security.php.
- ;;;;;;;;;;;;;;;;;;;
- ; About php.ini ;
- ;;;;;;;;;;;;;;;;;;;
- ; This file controls many aspects of PHP's behavior. In order for PHP to
- ; read it, it must be named 'php.ini'. PHP looks for it in the current
- ; working directory, in the path designated by the environment variable
- ; PHPRC, and in the path that was defined in compile time (in that order).
- ; Under Windows, the compile-time path is the Windows directory. The
- ; path in which the php.ini file is looked for can be overridden using
- ; the -c argument in command line mode.
- ;
- ; The syntax of the file is extremely simple. Whitespace and Lines
- ; beginning with a semicolon are silently ignored (as you probably guessed).
- ; Section headers (e.g. [Foo]) are also silently ignored, even though
- ; they might mean something in the future.
- ;
- ; Directives are specified using the following syntax:
- ; directive = value
- ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
- ;
- ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
- ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
- ; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
- ;
- ; Expressions in the INI file are limited to bitwise operators and parentheses:
- ; | bitwise OR
- ; & bitwise AND
- ; ~ bitwise NOT
- ; ! boolean NOT
- ;
- ; Boolean flags can be turned on using the values 1, On, True or Yes.
- ; They can be turned off using the values 0, Off, False or No.
- ;
- ; An empty string can be denoted by simply not writing anything after the equal
- ; sign, or by using the None keyword:
- ;
- ; foo = ; sets foo to an empty string
- ; foo = none ; sets foo to an empty string
- ; foo = "none" ; sets foo to the string 'none'
- ;
- ; If you use constants in your value, and these constants belong to a
- ; dynamically loaded extension (either a PHP extension or a Zend extension),
- ; you may only use these constants *after* the line that loads the extension.
- ;
- ;
- ;;;;;;;;;;;;;;;;;;;
- ; About this file ;
- ;;;;;;;;;;;;;;;;;;;
- ; All the values in the php.ini-dist file correspond to the builtin
- ; defaults (that is, if no php.ini is used, or if you delete these lines,
- ; the builtin defaults will be identical).
- ;;;;;;;;;;;;;;;;;;;;
- ; Language Options ;
- ;;;;;;;;;;;;;;;;;;;;
- ; Enable the PHP scripting language engine under Apache.
- engine = On
- ; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
- zend.ze1_compatibility_mode = Off
- ; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
- ; NOTE: Using short tags should be avoided when developing applications or
- ; libraries that are meant for redistribution, or deployment on PHP
- ; servers which are not under your control, because short tags may not
- ; be supported on the target server. For portable, redistributable code,
- ; be sure not to use short tags.
- short_open_tag = On
- ; Allow ASP-style <% %> tags.
- asp_tags = Off
- ; The number of significant digits displayed in floating point numbers.
- precision = 12
- ; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
- y2k_compliance = On
- ; Output buffering allows you to send header lines (including cookies) even
- ; after you send body content, at the price of slowing PHP's output layer a
- ; bit. You can enable output buffering during runtime by calling the output
- ; buffering functions. You can also enable output buffering for all files by
- ; setting this directive to On. If you wish to limit the size of the buffer
- ; to a certain size - you can use a maximum number of bytes instead of 'On', as
- ; a value for this directive (e.g., output_buffering=4096).
- output_buffering = Off
- ; You can redirect all of the output of your scripts to a function. For
- ; example, if you set output_handler to "mb_output_handler", character
- ; encoding will be transparently converted to the specified encoding.
- ; Setting any output handler automatically turns on output buffering.
- ; Note: People who wrote portable scripts should not depend on this ini
- ; directive. Instead, explicitly set the output handler using ob_start().
- ; Using this ini directive may cause problems unless you know what script
- ; is doing.
- ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
- ; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
- ; Note: output_handler must be empty if this is set 'On' !!!!
- ; Instead you must use zlib.output_handler.
- ;output_handler =
- ; Transparent output compression using the zlib library
- ; Valid values for this option are 'off', 'on', or a specific buffer size
- ; to be used for compression (default is 4KB)
- ; Note: Resulting chunk size may vary due to nature of compression. PHP
- ; outputs chunks that are few hundreds bytes each as a result of
- ; compression. If you prefer a larger chunk size for better
- ; performance, enable output_buffering in addition.
- ; Note: You need to use zlib.output_handler instead of the standard
- ; output_handler, or otherwise the output will be corrupted.
- zlib.output_compression = Off
- ;zlib.output_compression_level = -1
- ; You cannot specify additional output handlers if zlib.output_compression
- ; is activated here. This setting does the same as output_handler but in
- ; a different order.
- ;zlib.output_handler =
- ; Implicit flush tells PHP to tell the output layer to flush itself
- ; automatically after every output block. This is equivalent to calling the
- ; PHP function flush() after each and every call to print() or echo() and each
- ; and every HTML block. Turning this option on has serious performance
- ; implications and is generally recommended for debugging purposes only.
- implicit_flush = Off
- ; The unserialize callback function will be called (with the undefined class'
- ; name as parameter), if the unserializer finds an undefined class
- ; which should be instantiated.
- ; A warning appears if the specified function is not defined, or if the
- ; function doesn't include/implement the missing class.
- ; So only set this entry, if you really want to implement such a
- ; callback-function.
- unserialize_callback_func=
- ; When floats & doubles are serialized store serialize_precision significant
- ; digits after the floating point. The default value ensures that when floats
- ; are decoded with unserialize, the data will remain the same.
- serialize_precision = 100
- ; Whether to enable the ability to force arguments to be passed by reference
- ; at function call time. This method is deprecated and is likely to be
- ; unsupported in future versions of PHP/Zend. The encouraged method of
- ; specifying which arguments should be passed by reference is in the function
- ; declaration. You're encouraged to try and turn this option Off and make
- ; sure your scripts work properly with it in order to ensure they will work
- ; with future versions of the language (you will receive a warning each time
- ; you use this feature, and the argument will be passed by value instead of by
- ; reference).
- allow_call_time_pass_reference = On
- ;
- ; Safe Mode
- ;
- safe_mode = Off
- ; By default, Safe Mode does a UID compare check when
- ; opening files. If you want to relax this to a GID compare,
- ; then turn on safe_mode_gid.
- safe_mode_gid = Off
- ; When safe_mode is on, UID/GID checks are bypassed when
- ; including files from this directory and its subdirectories.
- ; (directory must also be in include_path or full path must
- ; be used when including)
- safe_mode_include_dir =
- ; When safe_mode is on, only executables located in the safe_mode_exec_dir
- ; will be allowed to be executed via the exec family of functions.
- safe_mode_exec_dir =
- ; Setting certain environment variables may be a potential security breach.
- ; This directive contains a comma-delimited list of prefixes. In Safe Mode,
- ; the user may only alter environment variables whose names begin with the
- ; prefixes supplied here. By default, users will only be able to set
- ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
- ;
- ; Note: If this directive is empty, PHP will let the user modify ANY
- ; environment variable!
- safe_mode_allowed_env_vars = PHP_
- ; This directive contains a comma-delimited list of environment variables that
- ; the end user won't be able to change using putenv(). These variables will be
- ; protected even if safe_mode_allowed_env_vars is set to allow to change them.
- safe_mode_protected_env_vars = LD_LIBRARY_PATH
- ; open_basedir, if set, limits all file operations to the defined directory
- ; and below. This directive makes most sense if used in a per-directory
- ; or per-virtualhost web server configuration file. This directive is
- ; *NOT* affected by whether Safe Mode is turned On or Off.
- ;open_basedir =
- ; This directive allows you to disable certain functions for security reasons.
- ; It receives a comma-delimited list of function names. This directive is
- ; *NOT* affected by whether Safe Mode is turned On or Off.
- disable_functions =
- ; This directive allows you to disable certain classes for security reasons.
- ; It receives a comma-delimited list of class names. This directive is
- ; *NOT* affected by whether Safe Mode is turned On or Off.
- disable_classes =
- ; Colors for Syntax Highlighting mode. Anything that's acceptable in
- ; <span style="color: ???????"> would work.
- ;highlight.string = #DD0000
- ;highlight.comment = #FF9900
- ;highlight.keyword = #007700
- ;highlight.bg = #FFFFFF
- ;highlight.default = #0000BB
- ;highlight.html = #000000
- ; If enabled, the request will be allowed to complete even if the user aborts
- ; the request. Consider enabling it if executing long request, which may end up
- ; being interrupted by the user or a browser timing out.
- ; ignore_user_abort = On
- ; Determines the size of the realpath cache to be used by PHP. This value should
- ; be increased on systems where PHP opens many files to reflect the quantity of
- ; the file operations performed.
- ; realpath_cache_size=16k
- ; Duration of time, in seconds for which to cache realpath information for a given
- ; file or directory. For systems with rarely changing files, consider increasing this
- ; value.
- ; realpath_cache_ttl=120
- ;
- ; Misc
- ;
- ; Decides whether PHP may expose the fact that it is installed on the server
- ; (e.g. by adding its signature to the Web server header). It is no security
- ; threat in any way, but it makes it possible to determine whether you use PHP
- ; on your server or not.
- expose_php = On
- ;;;;;;;;;;;;;;;;;;;
- ; Resource Limits ;
- ;;;;;;;;;;;;;;;;;;;
- max_execution_time = 300 ; Maximum execution time of each script, in seconds
- max_input_time = 300 ; Maximum amount of time each script may spend parsing request data
- ;max_input_nesting_level = 64 ; Maximum input variable nesting level
- memory_limit = 128M ; Maximum amount of memory a script may consume (128MB)
- ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
- ; Error handling and logging ;
- ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
- ; error_reporting is a bit-field. Or each number up to get desired error
- ; reporting level
- ; E_ALL - All errors and warnings (doesn't include E_STRICT)
- ; E_ERROR - fatal run-time errors
- ; E_RECOVERABLE_ERROR - almost fatal run-time errors
- ; E_WARNING - run-time warnings (non-fatal errors)
- ; E_PARSE - compile-time parse errors
- ; E_NOTICE - run-time notices (these are warnings which often result
- ; from a bug in your code, but it's possible that it was
- ; intentional (e.g., using an uninitialized variable and
- ; relying on the fact it's automatically initialized to an
- ; empty string)
- ; E_STRICT - run-time notices, enable to have PHP suggest changes
- ; to your code which will ensure the best interoperability
- ; and forward compatibility of your code
- ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
- ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
- ; initial startup
- ; E_COMPILE_ERROR - fatal compile-time errors
- ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
- ; E_USER_ERROR - user-generated error message
- ; E_USER_WARNING - user-generated warning message
- ; E_USER_NOTICE - user-generated notice message
- ;
- ; Examples:
- ;
- ; - Show all errors, except for notices and coding standards warnings
- ;
- ;error_reporting = E_ALL & ~E_NOTICE
- ;
- ; - Show all errors, except for notices
- ;
- ;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
- ;
- ; - Show only errors
- ;
- ;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
- ;
- ; - Show all errors except for notices and coding standards warnings
- ;
- error_reporting = E_ALL & ~E_NOTICE
- ; Print out errors (as a part of the output). For production web sites,
- ; you're strongly encouraged to turn this feature off, and use error logging
- ; instead (see below). Keeping display_errors enabled on a production web site
- ; may reveal security information to end users, such as file paths on your Web
- ; server, your database schema or other information.
- ;
- ; possible values for display_errors:
- ;
- ; Off - Do not display any errors
- ; stderr - Display errors to STDERR (affects only CGI/CLI binaries!)
- ;
- ;display_errors = "stderr"
- ;
- ; stdout (On) - Display errors to STDOUT
- ;
- display_errors = On
- ; Even when display_errors is on, errors that occur during PHP's startup
- ; sequence are not displayed. It's strongly recommended to keep
- ; display_startup_errors off, except for when debugging.
- display_startup_errors = Off
- ; Log errors into a log file (server-specific log, stderr, or error_log (below))
- ; As stated above, you're strongly advised to use error logging in place of
- ; error displaying on production web sites.
- log_errors = Off
- ; Set maximum length of log_errors. In error_log information about the source is
- ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
- log_errors_max_len = 1024
- ; Do not log repeated messages. Repeated errors must occur in same file on same
- ; line until ignore_repeated_source is set true.
- ignore_repeated_errors = Off
- ; Ignore source of message when ignoring repeated messages. When this setting
- ; is On you will not log errors with repeated messages from different files or
- ; source lines.
- ignore_repeated_source = Off
- ; If this parameter is set to Off, then memory leaks will not be shown (on
- ; stdout or in the log). This has only effect in a debug compile, and if
- ; error reporting includes E_WARNING in the allowed list
- report_memleaks = On
- ;report_zend_debug = 0
- ; Store the last error/warning message in $php_errormsg (boolean).
- track_errors = Off
- ; Disable the inclusion of HTML tags in error messages.
- ; Note: Never use this feature for production boxes.
- ;html_errors = Off
- ; If html_errors is set On PHP produces clickable error messages that direct
- ; to a page describing the error or function causing the error in detail.
- ; You can download a copy of the PHP manual from http://www.php.net/docs.php
- ; and change docref_root to the base URL of your local copy including the
- ; leading '/'. You must also specify the file extension being used including
- ; the dot.
- ; Note: Never use this feature for production boxes.
- ;docref_root = "/phpmanual/"
- ;docref_ext = .html
- ; String to output before an error message.
- ;error_prepend_string = "<font color=#ff0000>"
- ; String to output after an error message.
- ;error_append_string = "</font>"
- ; Log errors to specified file.
- ;error_log = filename
- ; Log errors to syslog (Event Log on NT, not valid in Windows 95).
- ;error_log = syslog
- ;;;;;;;;;;;;;;;;;
- ; Data Handling ;
- ;;;;;;;;;;;;;;;;;
- ;
- ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
- ; The separator used in PHP generated URLs to separate arguments.
- ; Default is "&".
- ;arg_separator.output = "&"
- ; List of separator(s) used by PHP to parse input URLs into variables.
- ; Default is "&".
- ; NOTE: Every character in this directive is considered as separator!
- ;arg_separator.input = ";&"
- ; This directive describes the order in which PHP registers GET, POST, Cookie,
- ; Environment and Built-in variables (G, P, C, E & S respectively, often
- ; referred to as EGPCS or GPC). Registration is done from left to right, newer
- ; values override older values.
- variables_order = "EGPCS"
- ; Whether or not to register the EGPCS variables as global variables. You may
- ; want to turn this off if you don't want to clutter your scripts' global scope
- ; with user data. This makes most sense when coupled with track_vars - in which
- ; case you can access all of the GPC variables through the $HTTP_*_VARS[],
- ; variables.
- ;
- ; You should do your best to write your scripts so that they do not require
- ; register_globals to be on; Using form variables as globals can easily lead
- ; to possible security problems, if the code is not very well thought of.
- register_globals = Off
- ; Whether or not to register the old-style input arrays, HTTP_GET_VARS
- ; and friends. If you're not using them, it's recommended to turn them off,
- ; for performance reasons.
- register_long_arrays = On
- ; This directive tells PHP whether to declare the argv&argc variables (that
- ; would contain the GET information). If you don't use these variables, you
- ; should turn it off for increased performance.
- register_argc_argv = On
- ; When enabled, the SERVER and ENV variables are created when they're first
- ; used (Just In Time) instead of when the script starts. If these variables
- ; are not used within a script, having this directive on will result in a
- ; performance gain. The PHP directives register_globals, register_long_arrays,
- ; and register_argc_argv must be disabled for this directive to have any affect.
- auto_globals_jit = On
- ; Maximum size of POST data that PHP will accept.
- post_max_size = 100M
- ; Magic quotes
- ;
- ; Magic quotes for incoming GET/POST/Cookie data.
- magic_quotes_gpc = On
- ; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
- magic_quotes_runtime = Off
- ; Use Sybase-style magic quotes (escape ' with '' instead of \').
- magic_quotes_sybase = Off
- ; Automatically add files before or after any PHP document.
- auto_prepend_file =
- auto_append_file =
- ; As of 4.0b4, PHP always outputs a character encoding by default in
- ; the Content-type: header. To disable sending of the charset, simply
- ; set it to be empty.
- ;
- ; PHP's built-in default is text/html
- default_mimetype = "text/html"
- ;default_charset = "iso-8859-1"
- ; Always populate the $HTTP_RAW_POST_DATA variable.
- ;always_populate_raw_post_data = On
- ;;;;;;;;;;;;;;;;;;;;;;;;;
- ; Paths and Directories ;
- ;;;;;;;;;;;;;;;;;;;;;;;;;
- ; UNIX: "/path1:/path2"
- ;include_path = ".:/php/includes"
- ;
- ; Windows: "\path1;\path2"
- ;include_path = ".;c:\php\includes"
- ; The root of the PHP pages, used only if nonempty.
- ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
- ; if you are running php as a CGI under any web server (other than IIS)
- ; see documentation for security issues. The alternate is to use the
- ; cgi.force_redirect configuration below
- doc_root =
- ; The directory under which PHP opens the script using /~username used only
- ; if nonempty.
- user_dir =
- ; Directory in which the loadable extensions (modules) reside.
- extension_dir = "d:/php/php/ext"
- ; Whether or not to enable the dl() function. The dl() function does NOT work
- ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
- ; disabled on them.
- enable_dl = On
- ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
- ; most web servers. Left undefined, PHP turns this on by default. You can
- ; turn it off here AT YOUR OWN RISK
- ; **You CAN safely turn this off for IIS, in fact, you MUST.**
- ; cgi.force_redirect = 1
- ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
- ; every request.
- ; cgi.nph = 1
- ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
- ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
- ; will look for to know it is OK to continue execution. Setting this variable MAY
- ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
- ; cgi.redirect_status_env = ;
- ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
- ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
- ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
- ; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
- ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
- ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
- ; cgi.fix_pathinfo=0
- ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
- ; security tokens of the calling client. This allows IIS to define the
- ; security context that the request runs under. mod_fastcgi under Apache
- ; does not currently support this feature (03/17/2002)
- ; Set to 1 if running under IIS. Default is zero.
- ; fastcgi.impersonate = 1;
- ; Disable logging through FastCGI connection
- ; fastcgi.logging = 0
- ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
- ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
- ; is supported by Apache. When this option is set to 1 PHP will send
- ; RFC2616 compliant header.
- ; Default is zero.
- ;cgi.rfc2616_headers = 0
- ;;;;;;;;;;;;;;;;
- ; File Uploads ;
- ;;;;;;;;;;;;;;;;
- ; Whether to allow HTTP file uploads.
- file_uploads = On
- ; Temporary directory for HTTP uploaded files (will use system default if not
- ; specified).
- upload_tmp_dir = D:\TMP\
- ; Maximum allowed size for uploaded files.
- upload_max_filesize = 100M
- ;;;;;;;;;;;;;;;;;;
- ; Fopen wrappers ;
- ;;;;;;;;;;;;;;;;;;
- ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
- allow_url_fopen = On
- ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
- allow_url_include = Off
- ; Define the anonymous ftp password (your email address)
- ;from="john@doe.com"
- ; Define the User-Agent string
- ; user_agent="PHP"
- ; Default timeout for socket based streams (seconds)
- default_socket_timeout = 120
- ; If your scripts have to deal with files from Macintosh systems,
- ; or you are running on a Mac and need to deal with files from
- ; unix or win32 systems, setting this flag will cause PHP to
- ; automatically detect the EOL character in those files so that
- ; fgets() and file() will work regardless of the source of the file.
- ; auto_detect_line_endings = Off
- ;;;;;;;;;;;;;;;;;;;;;;
- ; Dynamic Extensions ;
- ;;;;;;;;;;;;;;;;;;;;;;
- ;
- ; If you wish to have an extension loaded automatically, use the following
- ; syntax:
- ;
- ; extension=modulename.extension
- ;
- ; For example, on Windows:
- ;
- ; extension=msql.dll
- ;
- ; ... or under UNIX:
- ;
- ; extension=msql.so
- ;
- ; Note that it should be the name of the module only; no directory information
- ; needs to go here. Specify the location of the extension with the
- ; extension_dir directive above.
- ; Windows Extensions
- ; Note that ODBC support is built in, so no dll is needed for it.
- ; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
- ; extension folders as well as the separate PECL DLL download (PHP 5).
- ; Be sure to appropriately set the extension_dir directive.
- ;extension=php_bz2.dll
- ;extension=php_curl.dll
- ;extension=php_dba.dll
- ;extension=php_dbase.dll
- ;extension=php_exif.dll
- ;extension=php_fdf.dll
- extension=php_gd2.dll
- ;extension=php_gettext.dll
- ;extension=php_gmp.dll
- ;extension=php_ifx.dll
- ;extension=php_imap.dll
- ;extension=php_interbase.dll
- ;extension=php_ldap.dll
- extension=php_mbstring.dll
- ;extension=php_mcrypt.dll
- ;extension=php_mhash.dll
- ;extension=php_mime_magic.dll
- ;extension=php_ming.dll
- ;extension=php_msql.dll
- ;extension=php_mssql.dll
- extension=php_mysql.dll
- extension=php_mysqli.dll
- ;extension=php_oci8.dll
- ;extension=php_openssl.dll
- ;extension=php_pdo.dll
- ;extension=php_pdo_firebird.dll
- ;extension=php_pdo_mssql.dll
- ;extension=php_pdo_mysql.dll
- ;extension=php_pdo_oci.dll
- ;extension=php_pdo_oci8.dll
- ;extension=php_pdo_odbc.dll
- ;extension=php_pdo_pgsql.dll
- ;extension=php_pdo_sqlite.dll
- ;extension=php_pgsql.dll
- ;extension=php_pspell.dll
- ;extension=php_shmop.dll
- ;extension=php_snmp.dll
- ;extension=php_soap.dll
- ;extension=php_sockets.dll
- ;extension=php_sqlite.dll
- ;extension=php_sybase_ct.dll
- ;extension=php_tidy.dll
- ;extension=php_xmlrpc.dll
- extension=php_xsl.dll
- extension=php_zip.dll
- ;;;;;;;;;;;;;;;;;;;
- ; Module Settings ;
- ;;;;;;;;;;;;;;;;;;;
- [Date]
- ; Defines the default timezone used by the date functions
- ;date.timezone =
- ;date.default_latitude = 31.7667
- ;date.default_longitude = 35.2333
- ;date.sunrise_zenith = 90.583333
- ;date.sunset_zenith = 90.583333
- [filter]
- ;filter.default = unsafe_raw
- ;filter.default_flags =
- [iconv]
- ;iconv.input_encoding = ISO-8859-1
- ;iconv.internal_encoding = ISO-8859-1
- ;iconv.output_encoding = ISO-8859-1
- [sqlite]
- ;sqlite.assoc_case = 0
- [xmlrpc]
- ;xmlrpc_error_number = 0
- ;xmlrpc_errors = 0
- [Pcre]
- ;PCRE library backtracking limit.
- ;pcre.backtrack_limit=100000
- ;PCRE library recursion limit.
- ;Please note that if you set this value to a high number you may consume all
- ;the available process stack and eventually crash PHP (due to reaching the
- ;stack size limit imposed by the Operating System).
- ;pcre.recursion_limit=100000
- [Syslog]
- ; Whether or not to define the various syslog variables (e.g. $LOG_PID,
- ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
- ; runtime, you can define these variables by calling define_syslog_variables().
- define_syslog_variables = Off
- [mail function]
- ; For Win32 only.
- SMTP = localhost
- smtp_port = 25
- ; For Win32 only.
- ;sendmail_from = me@example.com
- ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
- ;sendmail_path =
- ; Force the addition of the specified parameters to be passed as extra parameters
- ; to the sendmail binary. These parameters will always replace the value of
- ; the 5th parameter to mail(), even in safe mode.
- ;mail.force_extra_parameters =
- [SQL]
- sql.safe_mode = Off
- [ODBC]
- ;odbc.default_db = Not yet implemented
- ;odbc.default_user = Not yet implemented
- ;odbc.default_pw = Not yet implemented
- ; Allow or prevent persistent links.
- odbc.allow_persistent = On
- ; Check that a connection is still valid before reuse.
- odbc.check_persistent = On
- ; Maximum number of persistent links. -1 means no limit.
- odbc.max_persistent = -1
- ; Maximum number of links (persistent + non-persistent). -1 means no limit.
- odbc.max_links = -1
- ; Handling of LONG fields. Returns number of bytes to variables. 0 means
- ; passthru.
- odbc.defaultlrl = 4096
- ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
- ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
- ; of uodbc.defaultlrl and uodbc.defaultbinmode
- odbc.defaultbinmode = 1
- [MySQL]
- ; Allow or prevent persistent links.
- mysql.allow_persistent = On
- ; Maximum number of persistent links. -1 means no limit.
- mysql.max_persistent = -1
- ; Maximum number of links (persistent + non-persistent). -1 means no limit.
- mysql.max_links = -1
- ; Default port number for mysql_connect(). If unset, mysql_connect() will use
- ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
- ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
- ; at MYSQL_PORT.
- mysql.default_port =
- ; Default socket name for local MySQL connects. If empty, uses the built-in
- ; MySQL defaults.
- mysql.default_socket =
- ; Default host for mysql_connect() (doesn't apply in safe mode).
- mysql.default_host =
- ; Default user for mysql_connect() (doesn't apply in safe mode).
- mysql.default_user =
- ; Default password for mysql_connect() (doesn't apply in safe mode).
- ; Note that this is generally a *bad* idea to store passwords in this file.
- ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
- ; and reveal this password! And of course, any users with read access to this
- ; file will be able to reveal the password as well.
- mysql.default_password =
- ; Maximum time (in seconds) for connect timeout. -1 means no limit
- mysql.connect_timeout = 60
- ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
- ; SQL-Errors will be displayed.
- mysql.trace_mode = Off
- [MySQLi]
- ; Maximum number of links. -1 means no limit.
- mysqli.max_links = -1
- ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
- ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
- ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
- ; at MYSQL_PORT.
- mysqli.default_port = 3306
- ; Default socket name for local MySQL connects. If empty, uses the built-in
- ; MySQL defaults.
- mysqli.default_socket =
- ; Default host for mysql_connect() (doesn't apply in safe mode).
- mysqli.default_host =
- ; Default user for mysql_connect() (doesn't apply in safe mode).
- mysqli.default_user =
- ; Default password for mysqli_connect() (doesn't apply in safe mode).
- ; Note that this is generally a *bad* idea to store passwords in this file.
- ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
- ; and reveal this password! And of course, any users with read access to this
- ; file will be able to reveal the password as well.
- mysqli.default_pw =
- ; Allow or prevent reconnect
- mysqli.reconnect = Off
- [mSQL]
- ; Allow or prevent persistent links.
- msql.allow_persistent = On
- ; Maximum number of persistent links. -1 means no limit.
- msql.max_persistent = -1
- ; Maximum number of links (persistent+non persistent). -1 means no limit.
- msql.max_links = -1
- [OCI8]
- ; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
- ;oci8.privileged_connect = Off
- ; Connection: The maximum number of persistent OCI8 connections per
- ; process. Using -1 means no limit.
- ;oci8.max_persistent = -1
- ; Connection: The maximum number of seconds a process is allowed to
- ; maintain an idle persistent connection. Using -1 means idle
- ; persistent connections will be maintained forever.
- ;oci8.persistent_timeout = -1
- ; Connection: The number of seconds that must pass before issuing a
- ; ping during oci_pconnect() to check the connection validity. When
- ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
- ; pings completely.
- ;oci8.ping_interval = 60
- ; Tuning: This option enables statement caching, and specifies how
- ; many statements to cache. Using 0 disables statement caching.
- ;oci8.statement_cache_size = 20
- ; Tuning: Enables statement prefetching and sets the default number of
- ; rows that will be fetched automatically after statement execution.
- ;oci8.default_prefetch = 10
- ; Compatibility. Using On means oci_close() will not close
- ; oci_connect() and oci_new_connect() connections.
- ;oci8.old_oci_close_semantics = Off
- [PostgresSQL]
- ; Allow or prevent persistent links.
- pgsql.allow_persistent = On
- ; Detect broken persistent links always with pg_pconnect().
- ; Auto reset feature requires a little overheads.
- pgsql.auto_reset_persistent = Off
- ; Maximum number of persistent links. -1 means no limit.
- pgsql.max_persistent = -1
- ; Maximum number of links (persistent+non persistent). -1 means no limit.
- pgsql.max_links = -1
- ; Ignore PostgreSQL backends Notice message or not.
- ; Notice message logging require a little overheads.
- pgsql.ignore_notice = 0
- ; Log PostgreSQL backends Noitce message or not.
- ; Unless pgsql.ignore_notice=0, module cannot log notice message.
- pgsql.log_notice = 0
- [Sybase]
- ; Allow or prevent persistent links.
- sybase.allow_persistent = On
- ; Maximum number of persistent links. -1 means no limit.
- sybase.max_persistent = -1
- ; Maximum number of links (persistent + non-persistent). -1 means no limit.
- sybase.max_links = -1
- ;sybase.interface_file = "/usr/sybase/interfaces"
- ; Minimum error severity to display.
- sybase.min_error_severity = 10
- ; Minimum message severity to display.
- sybase.min_message_severity = 10
- ; Compatibility mode with old versions of PHP 3.0.
- ; If on, this will cause PHP to automatically assign types to results according
- ; to their Sybase type, instead of treating them all as strings. This
- ; compatibility mode will probably not stay around forever, so try applying
- ; whatever necessary changes to your code, and turn it off.
- sybase.compatability_mode = Off
- [Sybase-CT]
- ; Allow or prevent persistent links.
- sybct.allow_persistent = On
- ; Maximum number of persistent links. -1 means no limit.
- sybct.max_persistent = -1
- ; Maximum number of links (persistent + non-persistent). -1 means no limit.
- sybct.max_links = -1
- ; Minimum server message severity to display.
- sybct.min_server_severity = 10
- ; Minimum client message severity to display.
- sybct.min_client_severity = 10
- [bcmath]
- ; Number of decimal digits for all bcmath functions.
- bcmath.scale = 0
- [browscap]
- ;browscap = extra/browscap.ini
- [Informix]
- ; Default host for ifx_connect() (doesn't apply in safe mode).
- ifx.default_host =
- ; Default user for ifx_connect() (doesn't apply in safe mode).
- ifx.default_user =
- ; Default password for ifx_connect() (doesn't apply in safe mode).
- ifx.default_password =
- ; Allow or prevent persistent links.
- ifx.allow_persistent = On
- ; Maximum number of persistent links. -1 means no limit.
- ifx.max_persistent = -1
- ; Maximum number of links (persistent + non-persistent). -1 means no limit.
- ifx.max_links = -1
- ; If on, select statements return the contents of a text blob instead of its id.
- ifx.textasvarchar = 0
- ; If on, select statements return the contents of a byte blob instead of its id.
- ifx.byteasvarchar = 0
- ; Trailing blanks are stripped from fixed-length char columns. May help the
- ; life of Informix SE users.
- ifx.charasvarchar = 0
- ; If on, the contents of text and byte blobs are dumped to a file instead of
- ; keeping them in memory.
- ifx.blobinfile = 0
- ; NULL's are returned as empty strings, unless this is set to 1. In that case,
- ; NULL's are returned as string 'NULL'.
- ifx.nullformat = 0
- [Session]
- ; Handler used to store/retrieve data.
- session.save_handler = files
- ; Argument passed to save_handler. In the case of files, this is the path
- ; where data files are stored. Note: Windows users have to change this
- ; variable in order to use PHP's session functions.
- ;
- ; As of PHP 4.0.1, you can define the path as:
- ;
- ; session.save_path = "N;/path"
- ;
- ; where N is an integer. Instead of storing all the session files in
- ; /path, what this will do is use subdirectories N-levels deep, and
- ; store the session data in those directories. This is useful if you
- ; or your OS have problems with lots of files in one directory, and is
- ; a more efficient layout for servers that handle lots of sessions.
- ;
- ; NOTE 1: PHP will not create this directory structure automatically.
- ; You can use the script in the ext/session dir for that purpose.
- ; NOTE 2: See the section on garbage collection below if you choose to
- ; use subdirectories for session storage
- ;
- ; The file storage module creates files using mode 600 by default.
- ; You can change that by using
- ;
- ; session.save_path = "N;MODE;/path"
- ;
- ; where MODE is the octal representation of the mode. Note that this
- ; does not overwrite the process's umask.
- session.save_path = "D:\TMP"
- ; Whether to use cookies.
- session.use_cookies = 1
- ;session.cookie_secure =
- ; This option enables administrators to make their users invulnerable to
- ; attacks which involve passing session ids in URLs; defaults to 0.
- ; session.use_only_cookies = 1
- ; Name of the session (used as cookie name).
- session.name = PHPSESSID
- ; Initialize session on request startup.
- session.auto_start = 0
- ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
- session.cookie_lifetime = 0
- ; The path for which the cookie is valid.
- session.cookie_path = /
- ; The domain for which the cookie is valid.
- session.cookie_domain =
- ; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
- session.cookie_httponly =
- ; Handler used to serialize data. php is the standard serializer of PHP.
- session.serialize_handler = php
- ; Define the probability that the 'garbage collection' process is started
- ; on every session initialization.
- ; The probability is calculated by using gc_probability/gc_divisor,
- ; e.g. 1/100 means there is a 1% chance that the GC process starts
- ; on each request.
- session.gc_probability = 1
- session.gc_divisor = 100
- ; After this number of seconds, stored data will be seen as 'garbage' and
- ; cleaned up by the garbage collection process.
- session.gc_maxlifetime = 1440
- ; NOTE: If you are using the subdirectory option for storing session files
- ; (see session.save_path above), then garbage collection does *not*
- ; happen automatically. You will need to do your own garbage
- ; collection through a shell script, cron entry, or some other method.
- ; For example, the following script would is the equivalent of
- ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
- ; cd /path/to/sessions; find -cmin +24 | xargs rm
- ; PHP 4.2 and less have an undocumented feature/bug that allows you to
- ; to initialize a session variable in the global scope, albeit register_globals
- ; is disabled. PHP 4.3 and later will warn you, if this feature is used.
- ; You can disable the feature and the warning separately. At this time,
- ; the warning is only displayed, if bug_compat_42 is enabled.
- session.bug_compat_42 = 1
- session.bug_compat_warn = 1
- ; Check HTTP Referer to invalidate externally stored URLs containing ids.
- ; HTTP_REFERER has to contain this substring for the session to be
- ; considered as valid.
- session.referer_check =
- ; How many bytes to read from the file.
- session.entropy_length = 0
- ; Specified here to create the session id.
- session.entropy_file =
- ;session.entropy_length = 16
- ;session.entropy_file = /dev/urandom
- ; Set to {nocache,private,public,} to determine HTTP caching aspects
- ; or leave this empty to avoid sending anti-caching headers.
- session.cache_limiter = nocache
- ; Document expires after n minutes.
- session.cache_expire = 180
- ; trans sid support is disabled by default.
- ; Use of trans sid may risk your users security.
- ; Use this option with caution.
- ; - User may send URL contains active session ID
- ; to other person via. email/irc/etc.
- ; - URL that contains active session ID may be stored
- ; in publically accessible computer.
- ; - User may access your site with the same session ID
- ; always using URL stored in browser's history or bookmarks.
- session.use_trans_sid = 0
- ; Select a hash function
- ; 0: MD5 (128 bits)
- ; 1: SHA-1 (160 bits)
- session.hash_function = 0
- ; Define how many bits are stored in each character when converting
- ; the binary hash data to something readable.
- ;
- ; 4 bits: 0-9, a-f
- ; 5 bits: 0-9, a-v
- ; 6 bits: 0-9, a-z, A-Z, "-", ","
- session.hash_bits_per_character = 4
- ; The URL rewriter will look for URLs in a defined set of HTML tags.
- ; form/fieldset are special; if you include them here, the rewriter will
- ; add a hidden <input> field with the info which is otherwise appended
- ; to URLs. If you want XHTML conformity, remove the form entry.
- ; Note that all valid entries require a "=", even if no value follows.
- url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=,fieldset="
- [MSSQL]
- ; Allow or prevent persistent links.
- mssql.allow_persistent = On
- ; Maximum number of persistent links. -1 means no limit.
- mssql.max_persistent = -1
- ; Maximum number of links (persistent+non persistent). -1 means no limit.
- mssql.max_links = -1
- ; Minimum error severity to display.
- mssql.min_error_severity = 10
- ; Minimum message severity to display.
- mssql.min_message_severity = 10
- ; Compatibility mode with old versions of PHP 3.0.
- mssql.compatability_mode = Off
- ; Connect timeout
- ;mssql.connect_timeout = 5
- ; Query timeout
- ;mssql.timeout = 60
- ; Valid range 0 - 2147483647. Default = 4096.
- ;mssql.textlimit = 4096
- ; Valid range 0 - 2147483647. Default = 4096.
- ;mssql.textsize = 4096
- ; Limits the number of records in each batch. 0 = all records in one batch.
- ;mssql.batchsize = 0
- ; Specify how datetime and datetim4 columns are returned
- ; On => Returns data converted to SQL server settings
- ; Off => Returns values as YYYY-MM-DD hh:mm:ss
- ;mssql.datetimeconvert = On
- ; Use NT authentication when connecting to the server
- mssql.secure_connection = Off
- ; Specify max number of processes. -1 = library default
- ; msdlib defaults to 25
- ; FreeTDS defaults to 4096
- ;mssql.max_procs = -1
- ; Specify client character set.
- ; If empty or not set the client charset from freetds.comf is used
- ; This is only used when compiled with FreeTDS
- ;mssql.charset = "ISO-8859-1"
- [Assertion]
- ; Assert(expr); active by default.
- ;assert.active = On
- ; Issue a PHP warning for each failed assertion.
- ;assert.warning = On
- ; Don't bail out by default.
- ;assert.bail = Off
- ; User-function to be called if an assertion fails.
- ;assert.callback = 0
- ; Eval the expression with current error_reporting(). Set to true if you want
- ; error_reporting(0) around the eval().
- ;assert.quiet_eval = 0
- [COM]
- ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
- ;com.typelib_file =
- ; allow Distributed-COM calls
- ;com.allow_dcom = true
- ; autoregister constants of a components typlib on com_load()
- ;com.autoregister_typelib = true
- ; register constants casesensitive
- ;com.autoregister_casesensitive = false
- ; show warnings on duplicate constant registrations
- ;com.autoregister_verbose = true
- [mbstring]
- ; language for internal character representation.
- ;mbstring.language = Japanese
- ; internal/script encoding.
- ; Some encoding cannot work as internal encoding.
- ; (e.g. SJIS, BIG5, ISO-2022-*)
- ;mbstring.internal_encoding = EUC-JP
- ; http input encoding.
- ;mbstring.http_input = auto
- ; http output encoding. mb_output_handler must be
- ; registered as output buffer to function
- ;mbstring.http_output = SJIS
- ; enable automatic encoding translation according to
- ; mbstring.internal_encoding setting. Input chars are
- ; converted to internal encoding by setting this to On.
- ; Note: Do _not_ use automatic encoding translation for
- ; portable libs/applications.
- ;mbstring.encoding_translation = Off
- ; automatic encoding detection order.
- ; auto means
- ;mbstring.detect_order = auto
- ; substitute_character used when character cannot be converted
- ; one from another
- ;mbstring.substitute_character = none;
- ; overload(replace) single byte functions by mbstring functions.
- ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
- ; etc. Possible values are 0,1,2,4 or combination of them.
- ; For example, 7 for overload everything.
- ; 0: No overload
- ; 1: Overload mail() function
- ; 2: Overload str*() functions
- ; 4: Overload ereg*() functions
- ;mbstring.func_overload = 0
- [FrontBase]
- ;fbsql.allow_persistent = On
- ;fbsql.autocommit = On
- ;fbsql.show_timestamp_decimals = Off
- ;fbsql.default_database =
- ;fbsql.default_database_password =
- ;fbsql.default_host =
- ;fbsql.default_password =
- ;fbsql.default_user = "_SYSTEM"
- ;fbsql.generate_warnings = Off
- ;fbsql.max_connections = 128
- ;fbsql.max_links = 128
- ;fbsql.max_persistent = -1
- ;fbsql.max_results = 128
- [gd]
- ; Tell the jpeg decode to libjpeg warnings and try to create
- ; a gd image. The warning will then be displayed as notices
- ; disabled by default
- ;gd.jpeg_ignore_warning = 0
- [exif]
- ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
- ; With mbstring support this will automatically be converted into the encoding
- ; given by corresponding encode setting. When empty mbstring.internal_encoding
- ; is used. For the decode settings you can distinguish between motorola and
- ; intel byte order. A decode setting cannot be empty.
- ;exif.encode_unicode = ISO-8859-15
- ;exif.decode_unicode_motorola = UCS-2BE
- ;exif.decode_unicode_intel = UCS-2LE
- ;exif.encode_jis =
- ;exif.decode_jis_motorola = JIS
- ;exif.decode_jis_intel = JIS
- [Tidy]
- ; The path to a default tidy configuration file to use when using tidy
- ;tidy.default_config = /usr/local/lib/php/default.tcfg
- ; Should tidy clean and repair output automatically?
- ; WARNING: Do not use this option if you are generating non-html content
- ; such as dynamic images
- tidy.clean_output = Off
- [soap]
- ; Enables or disables WSDL caching feature.
- soap.wsdl_cache_enabled=1
- ; Sets the directory name where SOAP extension will put cache files.
- soap.wsdl_cache_dir="/tmp"
- ; (time to live) Sets the number of second while cached file will be used
- ; instead of original one.
- soap.wsdl_cache_ttl=86400
- ; Local Variables:
- ; tab-width: 4
- ; End:
- [Zend]
- zend_extension_manager.optimizer_ts="L:\PHP\ZEND\lib\Optimizer-3.3.0"
- zend_extension_ts="L:\PHP\ZEND\lib\ZendExtensionManager.dll"
- zend_optimizer.optimization_level=1023
|
置顶卡
喧嚣卡
变色卡
千斤顶
显身卡
楼主
